For purposes of discussion and ease the following is being utilized by the Sue Line Railroad.
Photo courtsey of Dick Bronson at R-R CirKits.
A plant will be a turnout and its associated functions.
All plants will have the following:
Power to the turnout motor (tortoise)
Feedback from the turnout detector device
Enabling circuit for local control
Feedback for local control
Some plants will also have:
Signals.
Plant stand:
Each plant will start with a plant stand. This is a wooded structure constructed of two 1x4’s and a 1x2 as follows:
A 1x4 8 inches long will be the base.
A 1x4 12 inches long will be the back.
A 1x2 3 inches long will be the support.
Attach base to back and then attach support under base.
A TC-64 will then be attaches to the base.
Power for the TC-64 will be added from 12 v power bus.